Instruktsiia Po Ustanovki Dveri Kupe «FHD 2027»

: Turning these screws clockwise or counter-clockwise will raise or lower that side of the door to make it plumb.

You can often secure the bottom track initially with or "liquid nails" to test the door movement before permanently screwing it into the floor.

: This is usually the first piece installed. Cut it to the width of the opening using a hacksaw. Secure it to the top jamb or ceiling header using screws, ensuring it is perfectly level. Lower Track : instruktsiia po ustanovki dveri kupe

: Typically, the combined door panels should be at least 10 cm wider than the opening to provide a sufficient overlap when closed. 2. Installing the Tracks

For , align the lower track with the top one using a level or plumb line. : Turning these screws clockwise or counter-clockwise will

: Screw the roller brackets to the top (and sometimes bottom) of the door panels, usually 1–1.5 inches from the side edges. Mount the Panels :

: If the door doesn't sit flush against the wall, locate the adjustment screws on the bottom rollers. Cut it to the width of the opening using a hacksaw

: Use a level or plumb line to ensure the side walls and floor are perfectly horizontal and vertical.