Ustanovke Snpch Hp | Instruktsii Po

Visual tanks allow you to see exactly how much ink is left.

Reduces plastic waste from discarded single-use cartridges.

Power on the device and wait for the carriage to reach the replacement position. Once there, unplug the power cord to allow the carriage to move freely by hand. instruktsii po ustanovke snpch hp

Place the ink tanks on the same level as the printer. Never lift the tanks higher than the printer, as this can flood the printhead. Remove small rubber bungs and replace them with air filters to allow for proper ink flow.

Attach the hose bracket (T-bracket) to the printer's inner chassis. Ensure the tubing is long enough to reach both ends of the printer's width without getting stuck or pulling tight. Visual tanks allow you to see exactly how much ink is left

For many HP models, you must enlarge the air holes on existing cartridges using a drill bit provided in the kit. If the cartridges are new, remove the protective seals; if they are used, ensure they are fully refilled and functioning properly.

Connect the ink hoses to the cartridges using silicone L-shaped connectors. Insert the cartridges into the carriage until they click into place . Once there, unplug the power cord to allow

Initial setup can be messy and requires a steady hand for drilling or routing hoses.